Glass Engraving Machine Laser CO2 for Non-metal Products
|Zahlungsart:||L/C,T/T,D/P,Paypal,Money Gram,Western Union|
|Terms of Trade:||FOB,CIF|
|Minimum der Bestellmenge:||1 Set/Sets|
|Verpakung:||Standard inner plastic wrap and outer plywood case for Laser engraving and cutting machine.|
|Ort Von Zukunft:||Jinan, Shandong, China|
|Zertifikate :||CE, ISO9001|
Glass Engraving Machine Laser CO2 for Non-metal Products
Advantages of laser engraving:
1. Wide range: carbon dioxide laser can carve and cut almost any non-metallic material. And the price is low!
2. Safe and reliable: non-contact processing will not cause mechanical extrusion or mechanical stress to materials. No "knife mark", no damage to the surface of the workpiece; no deformation of the material;
3. Precision and delicacy: the machining accuracy can reach 0.02mm;
4. Saving environmental protection: the diameter of light beam and spot is small, generally less than 0.5mm; cutting and processing saves materials, safety and health;
5. Consistent effect: ensure that the processing effect of the same batch is completely consistent.
6. High speed and fast: high speed carving and cutting can be carried out immediately according to the drawings output by the computer.
7. Low cost: not limited by the processing quantity, laser processing is cheaper for small batch processing services.
1. Acrylic transparent cover can not only isolate the internal and external environment, but also facilitate people to observe the processing process and the working state of the machine in time;
2. Adopt imported high-precision guide rail system to ensure processing accuracy and service life;
3. The movable universal wheel makes the movement of the machine more convenient;
4. Laser tube adopts industry model products to ensure processing accuracy and durability;
5. Electric lifting platform + automatic focusing device + red light indication;
6. The optical lens adopts high-strength gold-plated silicon and aspheric focusing lens, so the lens is resistant to scrubbing and high temperature and does not need to be replaced frequently, which reduces the recovery cost. The focusing diameter of the aspheric lens is small and the cutting effect is good;
7. Adopt DSP control system, run smoothly, modularization, uniform design, uniform installation, strong anti-interference ability, easy to detect and replace parts;
8. The laser tube adopts the forced water-cooled valve rod. Water pump or chiller can control temperature automatically;
9. Applicable to Al, CDR, BMP, DST, DSB, PXF ETO and other modes.
clothing and accessories, leather products, plush toys, advertising and decoration, craft gifts, paper products, bamboo and wood products, electronic appliances, lighting, packaging and plate making, daily necessities model, shadow carving, packaging lining and printing, food, wood model, jigsaw, electrical plastic products, furniture, mica, insulation materials and other industries.
all kinds of cloth, leather, plexiglass, cardboard plastic PET / PVC / PC / ABS, mica board, felt cloth, sponge, foam, pearl cotton, EVA, fiber material, silica gel material, composite material, epoxy resin, paper, wood bamboo, rubber, resin, ceramics, granite, acrylic, wood, cloth, wool, and other non-metallic materials.
clothing stick cloth embroidery, weaving Mark, trademark cutting, clothing accessories carving, punching, edge cutting; leather punching, lofting, cutting materials; plexiglass, plastic, PVC, paper, wood and bamboo cutting; wood and bamboo, ceramics, granite, shadow carving industry sculpture.
Shandong U-MAY CNC Technology CO., LTD. is located in Jinan, the spring city of China. The brand name on the market is UTECH, which is a new brand launched by the company since its construction in 2014. The main products of the company are CNC machine tools, laser engraving machines, plasma engraving machines, fiber laser marking machines, etc. Regarding products, we have been adhering to the business philosophy of "Smart Solution, Better Tomorrow", aiming to provide the CNC engraving machines with high quality and excellent guarantee for the whole world.
In recent years, our company has followed the development of The Times and entered the transition period. By 2019, our carving machines are more actively sold to North America, the Middle East, Western Europe, southeast Asia, Africa, South America and other regions, and have a stable dealer agency in some regions.
The inner layer is wrapped with plastic film to protect the machine from friction damage caused by collision during transportation. The outer layer is a standard wooden box to stabilize the fuselage.
Ⅰ Inquiry and consulting support. 10 working days to produce the machine, meanwhile, we will report the production process in time.
Ⅱ Sample testing support.
Ⅲ View our Factory
Ⅰ Training how to install the machine, training how to use the machine by internet. 24 hours technical support by email, calling , if u have any problems, we will within 12 hours to solve it.
Ⅱ Some machine parts ( quality problems ) can be free charge to replace it within warranty.
1. How to guarantee the product to me? Is the purchase procedure complicated?
After you purchase Laser Engraving and Cutting Machine, we will keep in touch with you. The specific delivery process is in accordance with international trade practices, you can rest assured. If there is any doubt on some matters, the two sides can negotiate and deal with it.
2. What should I do if the product is found defective upon receipt of the goods?
Under normal circumstances, we will make strict inspection and test before the product leaves the factory. Video inspection is allowed if conditions permit. If you have time, you can come to our factory for on-site inspection. We will mail the missing parts and components in time.
3. How is the product packaged?
Product packaging is divided into three layers. The outer box is made of wood craft box.In the middle, the machine is covered with foam to protect it from vibration. The inner layer is waterproof and moisture-proof with thickened plastic bags.
4. Why can you trust us?
Our products are of high quality. We import important parts and components from Taiwan, Japan, etc., and have a series of relevant certificates as the basic guarantee. The whole process of assembly and processing has a full range of monitoring.In addition, the after-sales treatment is quite rigorous, and we will have technical staff to answer questions online in time.
5. What kind of factory is it?
Our company belongs to typical industrial and trading a shape, a statement that it is very
important, because the factory can control the machine quality, and trade departments can correct fully introduce to the buyer, integrating two department, not only guarantee the product quality, and can do real-time docking factories and sales staff, saving problem to deal with the wait time for you.
Our company is committed to the R & D, manufacturing and sales of CNC Router. The products under the UTECH brand include ATC Cnc Router, Woodworking Cnc Router, Mini Desktop Cnc Router, Oscillating Knife Cutter with CCD, Professional Stone Cnc Router, Plasma Cutting Machine, Fiber Laser Cutting Machine, Advertising Cnc Router and other machines.
Shandong U-May CNC Technology Co., Ltd.
Shandong U-MAY CNC-Technologie CO., LTD.Spezialisiert in der Forschung, Entwicklung, Produktion von CNC-Maschinen. Unsere Marke "WIN" "UTECH" hat einen beträchtlichen Ruf in den inländischen ähnlichen Produkten, die in den hölzernen Möbeln, in der Werbung, in den Handwerksgeschenken, in der Verpackung und im Drucken, im Logo und im etc. weit verbreitet ist. Unsere Produkte sind in viele Länder und in Regionen exportiert worden wie Europa, Russland, Asien, Afrika. Wir sind der Unternehmensführungsphilosophie "Integrität - basiert, ständig Innovation, effektive Kommunikation, Qualität Dienstleistungen" und das Ziel der "Technical Service Kunden" verpflichtet, sondern auch große Aufmerksamkeit auf Produktdesign, Herstellung, Installation, Anpassung. Wir werden immer noch unser Bestes versuchen, um aus einer Hand professionellen Service zu halten.
- Name der Firma: Shandong U-May CNC Technology Co., Ltd.
- Vertreter: Xin Li
- Produkt / Dienstleistung: Cnc-Router , Lasergravur Schneidemaschine , Oszillierende Messerschneidemaschine , Faserlaser-Schneidemaschine , Plasmaschneidmaschine , Faserlaserbeschriftungsanlage
- Kapital: 叁佰贰拾万元整
- Jahr Errichtet: 2014
- Absatzmenge des Jahres (in Mio. US $): US$1 Million - US$2.5 Million
- Exportanteil: 71% - 80%
- Jährliche Kaufvolumen (Millionen US $): US$2.5 Million - US$5 Million
- Zahl der Fertigungslinien: 5
- Zahl der Mannschaft der R&D: 21 -30 People
- Zahl der Mannschaft der QC: 5 -10 People
- OEM Dienstleistungen verbieten: yes
- Größe der Fabrik (Sq.meters):: 1,000-3,000 square meters
- Ort der Fabrik: No. 6-8, Industry South Road, Licheng District, Jinan, Shandong, China (Mainland)
- Ansprechpartner: Ms. Sofia
- Telefonnummer: 86-186-63716521
Premium Related Products